RS-232C Cable is a cable to connect the COOL MUSCLE to a serial port. It is required to download parameters and bank programs to motors. Standard length is 2000mm.
Motor Cable (CM1C1-400S)
A standard motor cable (400mm) bandled in COOL MUSCLE motor. You can use the motor cable for pulse control or IO control.
Daisy Chain the COOL MUSCLE by using the Network cards. Max. 15 axes of motor can be used in 1 Daisy Chain network. Use Master Card for the 1st axis and Slave Card for after the 2nd axis.
- Master Card set (CM1DC1-MBSC)
- Slave Card set (CM1DC1-SBSC)
- Network Board Case (CM1DC1-CASE)
* Separately Straight Cable for Network is required
Straight Cable (CM1DC1-SSC-1800)
This is standard D-SUB 9 pin serial straight cable. This cable is for network card for Daisy Chain. The length is 1800mm.
Designed specifically for the COOL MUSCLE. The peak current protection protects the power supply from being re-set and current will be supplied stably.
- 150W/6A (CMPS-XMUS-150)
- 240W/10A (CMPS-XMUS-240)
EtherCAT COOL MUSCLE Bridge
EtherCAT COOL MUSCLE Bridge that adapts / connects COOL MUSCLE to EtherCAT network. 4 pieces of CM1/CM2 can be connected per bridge and it realizes 4-axis COOL MUSCLE EtherCAT slave.
* Separately EtherCAT COOL MUSCLE Bridge CM1 Communication Cable and EtherCAT COOL MUSCLE Bridge Power Cable required
* Please prepare LAN cable
EtherCAT COOL MUSCLE Bridge CM1 Communication Cable (EH01-2000W)(EH01-2000W)
This is CM1 communication cable for EtherCAT COOL MUSCLE Bridge EB01 and EB12. The standard length is 2000mm.
* Please purchase CM2 communication cable EH02-2000W when using CM2 with EB12
EtherCAT COOL MUSCLE Bridge Power Cable (EHPW-2000S)
This is power cable for EtherCAT COOL MUSCLE Bridge. The standard length is 2000mm.